IPS 4 gallon

Item Weight: 12.5 lb
Sales Unit: EA
Weld-On® 4™ gallon *requires applicator
Quantity1 – 34 +
1 – 3$103.22
4 +$89.06


WARNING: This product can expose you to chemicals including Methylene Chloride, which is known to the State of California to cause cancer. For more information, go to http://www.P65Warnings.ca.gov.

WELD-ON ¬ 4» is formulated as a blush-resistant cement for bonding acrylic (poly-methyl methacrylate) to itself. It will also form strong bonds with other thermoplastics such as polystyrene, CAB (cellulose acetate butyrate), and polycarbonate to themselves. It is not recommended for cross-linked acrylic.

WELD-ON 4 is used extensively in sign fabrication for cementing acrylic letters to flat acrylic presentation panels and trim-capping of cut out acrylic letters. Strong butt joints are made with flat sheets by using the soak method. WELD-ON 4 is also widely used in many applications e.g. fabrication of display and presentation cases, medical equipment assembly, the bonding of plastic containers and pre-forms, and in the manufacture of numerous solvent welded structures and subassemblies using the capillary method.

Weld-On 4 is a water-thin,somewhat flammable cement formulated to quickly develop very clear and high strength bonds for many thermoplastic substrates. The bond is achieved by first softening the surfaces to be joined and then fusing them together with the dissipation of the solvent.The initial bond forms within a matter of minutes and is followed by a significant and continual increase in bond strength over the next several hours. WELD-OON 4 may be preferred by some plastic fabricators because it is less likely to leave white marks (ccommonly called blushing).. For similar applications but faster setting cement, WELD-ON ¬ 3» is recommended.

If you need more information on this product please click the following link to view the manufacturer's literature page.