Plexiglass acrylic sheet with abrasion resistant coating protects against light scratches, abrasions, and many chemicals. Available with coatings on 1 side (AR1) or 2 sides (AR2).
Our ACRYLITE® optical abrasion resistant sheets resist marring and scratching from everyday public contact, daily cleanings and airborne dirt and dust that are found in many applications. This property significantly extends the service life of the product.
Half the weight of glass
10 times stronger than glass
Sports Arena Glazing
Instrument Cluster Panels
Regulatory Code Compliance and Approval:
ANSI Z 97.1 for safety glazing materials used in buildings
ANSI Z26.1, AS-4, 5, 6 & 7 for safety glazing materials for glazing motor vehicles
Uniform Building Codes for use as a light
ICC Evaluations Service Report ESR-1260
Consumer Products Safety Commission
Safety Standard for Architectural Glazing Materials
Categories I & II UL Recognized Component
File # E54671: UL Flammability Ratings: HB in all thicknesses
AR Coated Sheet
Non Coated Sheet
*The above table describes the time it took the chemical to visually attack the surface. Testing the resistance of these chemicals was conducted per ASTM D 1308. Time intervals for visually inspecting the sheet surface: 15 minutes, 1 hour and 24 hours.
Thickness tolerances are +/- 10% on plexiglass sheets and can vary throughout the sheet. Normally we see variations less than 5%. Sheets sizes can vary from the manufacturer and some are cut from larger sheets. Because of this, the sheet dimensions are nominal and might be +/- saw cut. Call 1-800-474-3688 if you have any questions before placing your order.