IPS 3 4 oz.
SKU: IPS3-4oz.
Item Weight: 0.5 lb
Sales Unit: EA
Details
WARNING: This product can expose you to chemicals including Methylene Chloride, which is known to the State of California to cause cancer. For more information, go to http://www.P65Warnings.ca.gov.
Not available for shipment to SCAQMD, the air pollution control agency for all of Orange County and the urban portions of Los Angeles, Riverside and San Bernardino counties, among the smoggiest regions of the U.S.
SUBSTRATE RECOMMENDATIONS:
WELD-ON ¬ 3» is formulated for cementing acrylic (poly-methyl methacrylate) plastic to itself. It will also form strong bonds with other thermoplastics such as polystyrene, CAB (cellulose acetate butyrate), PETG (polyethylene terephthalate glycol) and polycarbonate to themselves. It is not recommended for cross-linked acrylic.
SUGGESTED BONDING APPLICATIONS AND RECOMMENDATIONS:
WELD-ON 3 is used extensively in sign fabrication. Strong butt joints are made with flat sheets by using the soak method for such applications as cementing letters to acrylic panels. Butyrate trim-capping of acrylics is another highly recommended use for WELD-ON 3. It is also widely used in the POP industry (e.g. display), and in the fabrication and bonding of plastic containers, housewares, bottles and any other applications using the capillary method.
_ GENERAL DESCRIPTION:_WELD-ON 3* is a water-thin, non-flammable cement formulated to quickly develop high strength,clear bonds to many thermoplastic substrates, particularly acrylic.The bond is achieved by first softening the surfaces to be joined and then fusing them together with dissipation of the solvent.The initial bond forms within a few minutes and quickly increases in strength.Substantial strength will be obtained within only a few hours. Under certain conditions, especially with high humidity, a white mark on the plastic (commonly called blushing) may sometimes be encountered. Where a more blush resistant cement and longer open time is required, WELD- ON ¬ 4» is recommended.
If you need more information on this product please click the following link to view the manufacturer's literature page.
Not available for shipment to SCAQMD, the air pollution control agency for all of Orange County and the urban portions of Los Angeles, Riverside and San Bernardino counties, among the smoggiest regions of the U.S.
SUBSTRATE RECOMMENDATIONS:
WELD-ON ¬ 3» is formulated for cementing acrylic (poly-methyl methacrylate) plastic to itself. It will also form strong bonds with other thermoplastics such as polystyrene, CAB (cellulose acetate butyrate), PETG (polyethylene terephthalate glycol) and polycarbonate to themselves. It is not recommended for cross-linked acrylic.
SUGGESTED BONDING APPLICATIONS AND RECOMMENDATIONS:
WELD-ON 3 is used extensively in sign fabrication. Strong butt joints are made with flat sheets by using the soak method for such applications as cementing letters to acrylic panels. Butyrate trim-capping of acrylics is another highly recommended use for WELD-ON 3. It is also widely used in the POP industry (e.g. display), and in the fabrication and bonding of plastic containers, housewares, bottles and any other applications using the capillary method.
_ GENERAL DESCRIPTION:_WELD-ON 3* is a water-thin, non-flammable cement formulated to quickly develop high strength,clear bonds to many thermoplastic substrates, particularly acrylic.The bond is achieved by first softening the surfaces to be joined and then fusing them together with dissipation of the solvent.The initial bond forms within a few minutes and quickly increases in strength.Substantial strength will be obtained within only a few hours. Under certain conditions, especially with high humidity, a white mark on the plastic (commonly called blushing) may sometimes be encountered. Where a more blush resistant cement and longer open time is required, WELD- ON ¬ 4» is recommended.
If you need more information on this product please click the following link to view the manufacturer's literature page.